Thrust Ball Bearings 230000 B BM Series
Double direction angular contact thrust ball bearings are designed to locate spindle shafts axially in both directions. These bearings are intended for mounting in combination with cylindrical roller bearings, and consist of two single row angular contact thrust ball bearings arranged back-to-back. The large number of balls enables these bearings to accommodate high axial loads in both directions and provides a high degree of system rigidity.
Angular Contact Ball Bearings 5300E Series
Large Angular Contact Ball Bearing - Open, Double Row
Two types of contact angles can be selected according to the magnitude of the axial load and moment load.
Similar to single-row deep groove ball bearings, with a seal (2NS) and shield (ZZ) attached.
Can be used on Blower, High-speed vacuum pump receiver, Supercharger and Two-wheeled vehicle transmission
Thrust Ball Bearings 53000U Series
53000 U-Bearings are bearings with self-aligning seat washers that can be used with self-aligning seat washers to compensate for angular misalignment between the support surface in the housing and the shaft. Depending on the bearing series, spherical seat washers have the basic designation U 2, U 3 or U 4, plus two digits indicating the size (eg spherical seat washer U 320 for bearing 53320).
Thrust Ball Bearings 52000 Series
Double direction thrust ball bearings type 52000 can withstand axial thrust loads in two directions, and can limit the movement of the shaft and housing in one direction. These bearings have a separable design for easy installation, removal and bearing inspection.
Needle Roller Bearings NA, NKI Type
There is an inner ring NA.NK type needle roller bearing. Since the inner ring has no rib, the inner ring, outer ring, a full set of needle rollers and cages can be installed separately, and the axial displacement of the shaft or housing is not restricted. Since the needle rollers are separated by a cage, the friction is reduced, so it can be used in parts with high rotation speed.
Thrust Ball Bearings 51000 Series
The 51000 Series Single Direction Thrust Ball Bearing has a Ball and Cage Assembly sandwiched between the ground ball track of the Housing Washer and the ground ball track of the Shaft Washer, contacting both rings at a 90-degree angle. These bearings are generally used in low speed applications and must be lubricated at installation with the appropriate grease or oil.
CONTACT US
E-mail: jmi@jmifag.com
WhatsApp: +8618616268806
Tel: +8618616268806
Tel:+86-21-59988652
JMI Shanghai Sales Department: No. 258, Jiamei Road, Jiading District, Shanghai
JMI Shandong Sales Department: Panzhuang Industrial Park, Linqing City, Shandong Province
WhatsApp: +8613734457666
