Thrust Ball Bearings 53000 Series
Type 53000 bearings are single direction thrust bearings with spherical housing locating washers to accommodate axial loads in one direction. They must not bear any radial loads. Many components are interchangeable. The shaft washers have ground holes for an interference fit.
This type not only has a separable design for easy installation/removal and maintenance inspection, but also interchanges components, the ground holes of the shaft washers allow for an interference fit, and the spherical housing washers accommodate initial misalignment.
Miniature deep groove ball bearings refer to metric series, with an outer diameter of less than 9mm; inch series, of various types of bearings with an outer diameter of less than 9.525mm, the main materials are carbon steel, bearing steel, stainless steel, plastic, ceramics, etc., of which the smallest inner diameter can be achieved 0.6mm, generally with an inner diameter of 1mm. Miniature deep groove balls are suitable for all kinds of industrial equipment, small rotary motors and other fields with high speed and low noise.
Pillow Block Bearings UCP NAP Type
UCP series housed units feature the set screw locking (UC) bearing insert. Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is strong and stiff, and is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount. Housing designed for ease of bearing replacement.
Deep Groove Ball Bearings 6800 Series
Thin-walled deep groove ball bearings have a simple structure and are easy to use. It is mainly used to bear radial load, and can also bear radial load and axial combined load at the same time. This series of bearings is suitable for places where the load and assembly shaft are relatively large and the space is restricted.
Deep Groove Ball Bearings 6700 Series
Thin-walled deep groove ball bearings consist of inner ring, outer ring, steel balls, cage, grease and seals.
Thin-walled deep groove ball bearing types:
Open and sealed two structures. There are open bearings, bearings with dust covers, seals or snap rings. Open type means that the bearing does not have a sealed structure, and the sealed thin-walled deep groove ball is divided into dust-proof seal and oil-proof seal. The material of the dust-proof sealing cover is stamped steel plate, which only serves to prevent dust from entering the bearing raceway. The oil-proof type is a contact oil seal, which can effectively prevent the grease in the bearing from overflowing.
Deep Groove Ball Bearings 6400 Series
The basic designs of single row deep groove ball bearings are open and sealed. For manufacturing reasons, open bearings of the same size as sealed or dust-proof bearings may also have seal grooves in the outer ring. Bearings with shields or seals on both sides are maintenance-free, lubricated for life. Such bearings cannot be cleaned and the temperature cannot exceed 80 degrees Celsius.
CONTACT US
E-mail: jmi@jmifag.com
WhatsApp: +8618616268806
Tel: +8618616268806
Tel:+86-21-59988652
JMI Shanghai Sales Department: No. 258, Jiamei Road, Jiading District, Shanghai
JMI Shandong Sales Department: Panzhuang Industrial Park, Linqing City, Shandong Province
WhatsApp: +8613734457666
