Deep Groove Ball Bearings 6300 Series
Single row deep groove ball bearing housings are the most widely used bearing types:
1. Basic design of open bearing
2. Sealed bearings
3. ICOS oil-sealed bearing unit
4. Bearings with snap grooves, with or without snap rings
1. Basic design of open bearing
2. Sealed bearings
3. ICOS oil-sealed bearing unit
4. Bearings with snap grooves, with or without snap rings
Deep Groove Ball Bearings 6200 Series
Single row deep groove ball bearing is the most representative structure of rolling bearings and has a wide range of uses. The raceways located on the inner ring and the outer ring have an arc cross section with a radius slightly larger than the radius of the rolling ball. In addition to bearing radial load, it can also bear axial load in two directions. Low friction torque, most suitable for applications requiring high speed rotation, low noise and low vibration. This kind of bearing, in addition to the open type, also has a bearing with a steel plate dust cover, a bearing with a rubber seal, or a bearing with a snap ring attached to the outer diameter of the outer ring. Generally, steel stamping cages are used. Mainly applicable cage: steel stamping cage (wave shape, crown shape...single row; S shape...double row)
Flange bearings are among the ultra-small bore miniature bearings, which can be divided into ZZ steel plate bearing dust cover series, RS rubber bearing sealing ring series, flange plate series, stainless steel series, ceramic ball series, etc. The miniature ball bearings have a wide range of uses. Suitable for products requiring high-speed rotation, low friction torque, low vibration and low noise.
Deep Groove Ball Bearings Double Row
Double row deep groove ball bearings are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. The design of double row deep groove ball bearings is basically the same as that of single row deep groove ball bearings. The deep groove ball shaft-shaped raceway plus the excellent tightness between the raceway and the steel ball.For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62xx and 63xx series, but have a considerably higher load carrying capacity.
Double row deep groove ball bearings are only available as open bearings (without seals or shields).
CONTACT US
E-mail: jmi@jmifag.com
WhatsApp: +8618616268806
Tel: +8618616268806
Tel:+86-21-59988652
JMI Shanghai Sales Department: No. 258, Jiamei Road, Jiading District, Shanghai
JMI Shandong Sales Department: Panzhuang Industrial Park, Linqing City, Shandong Province
WhatsApp: +8613734457666
