Thrust Ball Bearings 54000 Series
Double direction thrust ball bearings include a shaft washer, two seat washers and two steel ball-cage assemblies. The bearing is a separate type, and each part can be installed independently. Double direction bearings and single direction bearings use the same shaft washer, seat washer and steel ball-cage assembly.
Thrust Ball Bearings 230000 B BM Series
Double direction angular contact thrust ball bearings are designed to locate spindle shafts axially in both directions. These bearings are intended for mounting in combination with cylindrical roller bearings, and consist of two single row angular contact thrust ball bearings arranged back-to-back. The large number of balls enables these bearings to accommodate high axial loads in both directions and provides a high degree of system rigidity.
Thrust Ball Bearings 53000U Series
53000 U-Bearings are bearings with self-aligning seat washers that can be used with self-aligning seat washers to compensate for angular misalignment between the support surface in the housing and the shaft. Depending on the bearing series, spherical seat washers have the basic designation U 2, U 3 or U 4, plus two digits indicating the size (eg spherical seat washer U 320 for bearing 53320).
Thrust Ball Bearings 52000 Series
Double direction thrust ball bearings type 52000 can withstand axial thrust loads in two directions, and can limit the movement of the shaft and housing in one direction. These bearings have a separable design for easy installation, removal and bearing inspection.
Thrust Ball Bearings 51000 Series
The 51000 Series Single Direction Thrust Ball Bearing has a Ball and Cage Assembly sandwiched between the ground ball track of the Housing Washer and the ground ball track of the Shaft Washer, contacting both rings at a 90-degree angle. These bearings are generally used in low speed applications and must be lubricated at installation with the appropriate grease or oil.
Thrust Ball Bearings 53000 Series
Type 53000 bearings are single direction thrust bearings with spherical housing locating washers to accommodate axial loads in one direction. They must not bear any radial loads. Many components are interchangeable. The shaft washers have ground holes for an interference fit.
This type not only has a separable design for easy installation/removal and maintenance inspection, but also interchanges components, the ground holes of the shaft washers allow for an interference fit, and the spherical housing washers accommodate initial misalignment.
CONTACT US
E-mail: jmi@jmifag.com
WhatsApp: +8618616268806
Tel: +8618616268806
Tel:+86-21-59988652
JMI Shanghai Sales Department: No. 258, Jiamei Road, Jiading District, Shanghai
JMI Shandong Sales Department: Panzhuang Industrial Park, Linqing City, Shandong Province
WhatsApp: +8613734457666
